Many Pool Water owners have faced problems of that nature when their pools get heavy use or have been exposed to harsh weather conditions. Moreover, it repels most bathers with its disgusting look, not to mention that it is a sign of chemical imbalance and poor filtration mechanisms affecting the pool. Relax! It is simple…..you will make your pool water clean again in no time if only you can energetically follow a number of steps. The article offers tips on how one can achieve this; just follow through!”
- Test and Balance Your WaterImportance of Water Testing
In order to start the process of clearing a murky pool, it is imperative to understand what made it cloudy in the first place. Usually unbalanced water chemistry is the major factor that causes this.
Here are the levels you need to check using a reliable water testing kit:
– pH Level: Appropriate pH for pool water is 7.4 to 7.6. Either very low or very high pH value results in cloudiness as well as affects the work of chlorine.
– Total Alkalinity: In the range of 80-120 ppm; for total alkalinity acts as pH buffer preventing sudden changes in it.
- Shock Your PoolWhat is Pool Shocking?
Many people hear about this “pool shocking” and wonder what it is; The answer is straightforward.
It follows that with a big dose of chlorine or chlorine bleach (as is done in industrial plants) added to your pool water, within an hour available Chlorine in the water can quickly be more than doubled.
How to Shock Your Pool
- Test the pH Level
- Before shocking, make sure the pH is between 7.3 and 7.4. If it is too high, chlorine will be less effective.
- Choose the Right Shock Product
- CALCIUM HYPOCHLORITE (Cal-Hypo)–A popular, effective pool shock containing 65-75% chlorine. Ideal for pools with low calcium hardness.
- SODIUM DICHLOR–Contains 50-60% chlorine plus stabilizer. Perfect for routine maintenance.
- POTASSIUM MONOPERSULFATE (Non-Chlorine Shock)–Good to shock the pool regularly without increasing chlorine levels; especially in spas and hot tubs.
- LIQUID CHLORINE–Easy to use and fast acting but very strong, should use caution with it.
- Calculate the Amount of Shock Needed
- Use the instructions that come with the shock product for this part. The amount of shock powder required will typically be 1 pound per 10,000 gallons of pool water.
- Distribute the Shock Evenly
- While the pump and filter are running, pour the dissolved shock or liquid shock evenly around the pool perimeter. Do not put shock directly into the skimmer.
- Run the Filter and Pump
- Run the pump and filter continuously for at least 8 hours or overnight. This improves the circulation of shock throughout your pool and lets the filter capture debris and contaminants.
- Re-Test and Balance
- After 24 hours, re-test the water to make sure the chlorine levels have fallen back into the normal range (1-3 ppm) and that other chemical levels are balanced. If necessary, adjust pH and alkali levels.
- Use a Pool Clarifier or FlocculantPool Clarifier
A clarifier works to collect all the small particles together in one place where your filter can get them. It is a slower process but does well for routine maintenance.
Pool Flocculant
To get results more quickly you can use a floculant. This agent serves the same function as a clarifier but forces particles down to the bottom of the pool where they are easily vacuumed away. By doing things this way you labor longer, though the reward is quicker results.
- Run Your Filter ContinuouslyEnsuring Proper Filtration
Keep your filtering systems running continuously during the clearing process. Maintain your filter and your pump. Keep the filter clean, or backwash it regularly in order to ensure that the efficiency is maintained.
Types of Filters
- Sand Filters: These are the slowest to clear cloudy water.
- Cartridge Filters: Of efficiency.
- DE Filters: The highest efficiency of any type in clearing fine particles.
- Skim, Brush, and Vacuum Your PoolSkimming and Brushing
Brush the walls to dislodge any detritus or algae clinging to its surface and floor, which can also help stir up some dirt that is too small for normal vacuuming / easy suction. Basically, this should take care of it all between skimming or vacuuming.
Using Pool Cleaner Robots instead
Robotic Pool Cleaners: It is worth investing in a robotic pool cleaner for long-term maintenance and ease. The best robotic pool cleaners can automatically clean your pool, removing debris and even scrubbing the pool walls and floor to keep the water crystal clear. The Beatbot AquaSense Pro and AquaSense are top choices, featuring advanced navigation, powerful suction, and efficient filtration. Here is the detail for the products from Beatbot.
Conclusion
After removing the “green monster” from your pool, you can see sand grain by sand grain at the bottom of the deep end… but before fiddling around with that pump you’d better find the pool water test kit and see where things stand It is not all that difficult to clear up mucky pool water.
